Adds an additional 16 Digital Station ports to IP406 and IP412 control unit Avaya
IP400 16-port digital station module. Used to connect 44xx, 64xx, and 2420D
telephone sets to the IP Office. Require 1 rack mount kit and 1 power lead.
 

The DS V2 supersedes the original IP400 Digital Station, now referred to as a DS
V1. The module version is indicated by labels both the base and the rear of the
module. Key changes are:

• The DS ports have been rotated 180° to allow easier connection access.

• The port status LED’s have been moved and grouped adjacent to the ports.

• The DTE serial port on the rear of the module has been changed to a 9-pin
  D-type socket.

• The DS V2 uses an earthed 3-pin 60W external power supply unit.

Adds an additional 30 Digital Station ports to IP406 and IP412 control units.
Avaya IP400 30-port digital station module. Used to connect 44xx, 64xx, and
2420D telephone sets to the IP Office. To the IP403, IP406, and IP412. Require 1
rack mount kit and 1 power lead.

The DS V2 supersedes the original IP400 Digital Station, now referred to as a DS
V1. The module version is indicated by labels both the base and the rear of the
module. Key changes are:

• The DS ports have been rotated 180° to allow easier connection access.

• The port status LED’s have been moved and grouped adjacent to the ports.

• The DTE serial port on the rear of the module has been changed to a 9-pin D-type
  socket.

• The DS V2 uses an earthed 3-pin 60W external power supply unit.

Adds an additional 30 Plain Ordinary Telephone ports to IP406 and IP412 control
unitsAvaya IP400 30-port POTS expansion module. Used for analog devices,
such as fax machines and analog conference phones. . Require 1 rack mount kit
and 1 power lead.

The Phone V2 module supersedes the original IP400 Phone module, now referred
to as the Phone V1. The module version is indicated by labels on both the base
and the rear of the module. Key changes are:

• The Phone V2 uses an earthed 3-pin 60W external power supply unit.

• With IP Office 3.1, the Message Waiting Indication on each POT port can be
  configured for None, On (use the system locale default), Line Reversal A or
  Line Reversal B. POT ports on a Phone V2 module can additionally be
  configured for 101V, 81V and 51V Stepped operation.

• The ports do not include a ringing capacitor. Therefore for phones where this
  is a requirement, connection should be via a Master socket containing ringing
  capacitors.

• The DTE serial port on the rear of the module has been changed to a 9-pin
  D-type socket.

Adds an additional 16 Plain Ordinary Telephone ports to IP406 and IP412 control
unitsAvaya IP400 16-port POTS expansion module. Used for analog devices,
such as fax machines and analog conference phones.

• Require 1 rack mount kit and 1 power lead.

The Phone V2 module supersedes the original IP400 Phone module, now referred
to as the Phone V1. The module
version is indicated by labels on both the base and the rear of the module. Key
changes are:

• The Phone V2 uses an earthed 3-pin 60W external power supply unit.

• With IP Office 3.1, the Message Waiting Indication on each POT port can be
  configured for None, On (use the system locale default), Line Reversal A
  or Line Reversal B. POT ports on a Phone V2 module can additionally be
  configured for 101V, 81V and 51V Stepped operation.

• The ports do not include a ringing capacitor. Therefore for phones where this
  is a requirement, connection should be via a Master socket containing ringing
  capacitors.

• The DTE serial port on the rear of the module has been changed to a 9-pin Dtype
  socket.

Adds an additional 8 Plain Ordinary Telephone ports to IP406 and IP412 control
units. Avaya IP400 8-port POTS expansion module. Used for analog devices,
such as fax machines and analog conference phones. . Require 1 rack mount kit
and 1 power lead.

The Phone V2 module supersedes the original IP400 Phone module, now referred
to as the Phone V1. The module
version is indicated by labels on both the base and the rear of the module. Key
changes are

• The Phone V2 uses an earthed 3-pin 60W external power supply unit.

• With IP Office 3.1, the Message Waiting Indication on each POT port can be
  configured for None, On (use the system locale default), Line Reversal A
  or Line Reversal B. POT ports on a Phone V2 module can additionally be
  configured for 101V, 81V and 51V Stepped operation.

• The ports do not include a ringing capacitor. Therefore for phones where this
  is a requirement, connection should be via a Master socket containing ringing
  capacitors.

• The DTE serial port on the rear of the module has been changed to a 9-pin
  D-type socket.

Provides 8 ISDN S-interface device lines to the desktop. Avaya IP400 So8 module
provides 8 ISDN BRI lines to the desktop. Used to connect ISDN devices, such as
video-conferencing systems or a credit card reader with high speed connection.
The IP Office So8 expansion module supports both point-to-point and point-tomultipoint
connections. A maximum of 10 terminal endpoints identifiers (TEIs) are
supported. . Require 1 rack mount kit and 1 power lead.

Provides an additional 16 Analog trunks (loop start or ground start) and two power
fail sockets P400 Analog Trunk 16 provides 16 FXO ports for connectivity to
carrier telephone lines. IP400 Office analog trunk 16 provides an additional 16
analog trunks (loop start or ground start) and two power fail sockets. Require 1
rack mount kit and 1 power lead.

vIP400 WAN3 10/100 module. Used to to provide auto-sensing 3 additional X.21/
V.35 ports socket and using an appropriate connector cable). Line speeds up to
and including 2Mbps are supporting on each interface, the carrier providing the
line dictates the actual operating speed. The IP400 Office WAN3 10/100 may be
connected to the IP406 and IP412 platforms to provide additional WAN ports.
Each platform, except Small Office Edition, can support up to two WAN3 10/100
modules.
The IP400 Office WAN3 connects to the base unit through the Local Area Network
via a 10/100Mbps connection and does not use an expansion port on the control
unit so it does not impact on the maximum number of external expansion modules
supported. Require 1 rack mount kit and 1 power lead